MEDICA® EDI 15/30
For a constant flow of CLRW compliant water to multiple clinical diagnostics analyzers.
Features- Space saving design – smallest footprint available on the market for the pure water specification. Optional Docking Vessel water reservoir facilitates bench top or wall mounting as a single unit
- Guaranteed performance at all times through self-monitoring software, easy system maintenance, and emergency by-pass facility
- Pure water ready to go – water specification is maintained in the reservoir by regular recirculation through the system’s purification process
Ideally suited for:
• Single or multiple clinical analyzers requiring up to 30 liters/hr
• Single clinical analyzers requiring up to 1.5 liters/min instantaneous demand of CLRW grade water
Reliable and economical supply for analyzers which require higher volumes of water
Designed to supply CLRW grade water to a single analyzer. The MEDICA EDI 15/30 is the ideal system to provide predictable consumables usage, reducing the number of interventions.
The MEDICA EDI 15/30 is a compact, high-performance water purification system that directly feeds Clinical Diagnostic Analyzers with up to 1.5 l/min of CLRW standard grade water. The MEDICA EDI incorporates EDI ‘Pulse Technology’ using Electrodeionization (EDI). Innovative technology, combined with its unique features, makes the MEDICA EDI 15/30 a highly reliable and cost-effective choice.
"MEDICA EDI is very sturdy and rugged. It has multiple purification technologies inside to provide you with pure water. Compact size with all modules built in one. The preferred choice for our Diagnostics labs. "
Tech Specs
| PRODUCT SPECIFICATIONS | MEDICA EDI 15 | MEDICA EDI 30 |
|---|---|---|
| Dispense flowrate | 15 l/hr | 30 l/hr |
| Inorganics (resistivity at 25°C) | >10 MΩ.cm | >10 MΩ.cm |
| Organics (TOC) | <30 ppb | <30 ppb |
| Bacteria | <1 CFU/ml * | <1 CFU/ml * |
| Particles | 0.2 μm filter | 0.2 μm filter |
| Silica | <0.5 mg/l | <0.5 mg/l |
| Delivery flow rate | Up to 1.5 l/min | Up to 1.5 l/min |
| PRODUCT SPECIFICATIONS | MEDICA EDI 15 | MEDICA EDI 30 |
|---|---|---|
| Dispense flowrate | 15 l/hr | 30 l/hr |
| Inorganics (resistivity at 25°C) | >10 MΩ.cm | >10 MΩ.cm |
| Organics (TOC) | <30 ppb | <30 ppb |
| Bacteria | <1 CFU/ml * | <1 CFU/ml * |
| Particles | 0.2 μm filter | 0.2 μm filter |
| Silica | <0.5 mg/l | <0.5 mg/l |
| Delivery flow rate | Up to 1.5 l/min | Up to 1.5 l/min |
* Subject to correct operating and maintenance procedures. Installation of MEDICA EDI unit requires the LA800 pre-treatment assembly and LC281 pre-treatment filters.
Consumables
Chlorine, chloarmine and organics remain, increasing the burden on downstream consumables which will need more frequent and expensive changes
Ions will remain in the water
Increase in airborne contaminants and potential recontamination of purified water
Reduced flow-rates and bacterial specification will not be maintained
Uncontrolled bacterial contamination and TOC levels are not reduced
High levels of organics and inorganics remain in the water reducing the functional life of the DI pack
Chlorine, chloarmine and organics remain, increasing the burden on downstream consumables which will need more frequent and expensive changes
Ions will remain in the water
Increase in airborne contaminants and potential recontamination of purified water
Reduced flow-rates and bacterial specification will not be maintained
Uncontrolled bacterial contamination and TOC levels are not reduced
High levels of organics and inorganics remain in the water reducing the functional life of the DI pack
FAQs
- What is the MEDICA product range?
The MEDICA product range is specifically targeted at the Clinical diagnostics market. The MEDICA will either directly feed (analysers which require a direct feed) or fill via a dispense gun the analyser with water that meets the recommendations of the Clinical Laboratory Standards Institute (CLSI).
- How often do I need to change my consumables?
Consumables life depends entirely on the quality and volume of water being fed into the MEDICA product. Higher volumes and lower quality water will increase consumables usage.
- What feedwater is required?
Normally potable water is sufficient as feedwater. However, the quality of potable water can vary between countries and regions. Feed water specifications can be found in the operators manual and the data sheet of the product. It is important that if the feedwater specification is exceeded suitable pre-treatment be installed to bring the feedwater within specifications.
- What is the MEDICA EDI?
The MEDICA EDI is designed to reduce the running costs associated with purified water purification. This is because the EDI stack removes significant ionic content from the water before the water passes through downstream consumables, lowering the number of consumables which need to be changed.
- If it is cheaper to run should I always purchase the MEDICA EDI?
Low quality feedwater with very high ionic content can cause saturation of the EDI stack nullifying its benefits. It is therefore important to ensure that the feedwater is within the product specifications.
WHITEPAPER
Protecting Clinical Output from Water Risks
When lives are at stake, there is no margin for error. Your clinical analyser must receive a constant and reliable supply of CLRW* water, regardless of the quality of the feedwater available. Download our whitepaper to learn more.
Related Products
